:: Security Gates::
SECURITY GATES
Double Folding Security Gates
--------------------------------------------------------------------------------

For larger openings, overhead doors, dock doors,
storefronts, commercial and industrial use. These
two-piece gates can be made to any size width, and a
maximum height of 10'. Since they are Double Gates, each
side will swing (pivot 180 degrees) out of the way. This is
ideal for dock doors and overhead doors. Trucks and other
traffic can move freely in and out without any interference
from the gates.

Our Double Folding Gates are made from standard type
channel 3/4" (14 gauge), riveted back-to-back with 1-1/2" x
1-1/2" x 1/8" side rails for extra strength. The top bracket
(H-Bracket) keeps the gate secure at the top while a center
drop-pin provides maximum protection at the bottom of the
gate. Gates will lock together at the middle with use of a
standard type padlock. All Gates are shipped complete with
two mounting brackets, two washers, two casters, a
drop-pin and an H-bracket. For gates that will be installed
inside a dock door, extended brackets can be ordered to
keep gates back and out of the way of overhead doors. All
Folding Gates drop an inch per foot upon expansion. Our
Gates are painted enamel black
--------------------------------------------------------------------------------

For standard openings, patio doors, garages, industrial
and commercial use. These one-piece gates fit openings
4-1/2' to 7-1/2' wide and up to 8' in height. Stock Gates lock
on the left. Gates can be ordered to lock on the right side of
the opening. Provisions for a padlock are on the opposite
side of the mounting side. Gate can be installed on either
the facing or the casing of the opening. A ball bearing
caster is welded to the lead rail of the gate. This caster is
to aid in the extension and retraction of the gate. All Single
Gates will pivot 180 degrees when not in use. All Folding
Gates lose height when stretched from the collapsed
position to the in use or locked position.  All Single Gates
6-1/2' and 7-1/2' wide will have a drop pin in the center for
extra stability in wider openings.
Folding Security Door Gates
--------------------------------------------------------------------------------

Folding Door gates are designed to provide security for
door openings 24" to 48" wide. Heights range from 61" to
83".  

These gates have a reversible hinge design to allow
mounting on left or right side

They can be mounted in the casing or on the facing of the
door opening.

All Door Gates include a locking bar.

Our Folding Gates will pivot 180 degrees out of the way
when open.  

Our Door Gates are made of a sturdy 3/4" channel and are
painted black enamel.
FREE ESTIMATE
248-545-5555
586-524-1215
doors, hallways and entranceway's. They are used by manufacturing and warehouse facilities,
retail and distribution centers, education and health care institutions and in homes and offices.